Wuxi Jinlai Mechanical Processing Co., Ltd.
Wuxi Jinlai Machinical Processing Co., LTD
Add to Cart
Decorative 410 Stainless Steel Metal Plate For Commercial Kitchen Walls
| 410 Chemical composition: | ||||||
| C | Si | Mn | Cr | Ni | S | P |
| 0.15 | ≤1.0 | ≤1.0 | 11.5~13.5 | ≤0.03 | ≤0.04 | |
| mechanical properties: | ||||||
| Tensile strength σb (MPa) | Conditions yield strength 0.2 sigma (MPa) | Elongation % (min) | Hardness | |||
| 260 | 470 | 30 | ≤210HV | |||
410 stainless steel is produced according to the American ASTM standard stainless steel brand, equivalent to China's 1Cr13 stainless steel, S41000 (AISI, ASTM).Carbon 0.15%, chromium 13%,410 stainless steel: good corrosion resistance, machinability, general purpose edge, valve.Heat treatment of 410 stainless steel: solution treatment (℃) 800-900 slow cooling or 750 fast cooling.
Description:
Cold rolled: Hot rolled coil is used as raw material, and the oxide skin is removed by pickling. The product is rolled coil. The cold work hardening caused by continuous cold deformation makes the strength, hardness and toughness and plasticity of rolled coil increase, so the stamping performance will deteriorate and can only be used for parts with simple deformation. Rolled coil can be used as raw material for hot galvanizing plant because annealing lines are set up in hot galvanizing units. The weight of rolled coil is generally 6-13.5 tons. The hot rolled pickling coil is rolled continuously at room temperature. The inner diameter is 610 mm.
Cold Rolled Stainless Steel Sheet / Plate:
a. Stretch good, toughness, but the price is more expensive;
b. Cold rolling processing surface without oxide skin, good quality;
c. Cold rolling is generally used in the production of strip, the rolling speed is high;
d. Cold rolling than the thickness of the high precision. Mechanical properties, surface and so on in the hot rolling;
e. Cold-rolled steel coil due to a certain degree of work hardening, low toughness, but can achieve better yield ratio, used for cold-formed spring and other parts;
f. Cold coil yield point closer to the tensile strength, so the use of risk in the process of no predictability, when the load exceeds the allowable load prone to accidents
g. The surface of the cold rolled steel coil without plating is gray.
h. Cold rolled steel plate surface smoothness is higher than the hot rolled steel coil.
| Cold rolled plate | |||||||
|---|---|---|---|---|---|---|---|
| Specification (Thick) | Big Deviation | Normal Deviation | Small Deviation | No Deviation | |||
| 0.4mm | 0.3mm-0.32mm | 0.33mm-0.37mm | 0.37mm-0.39mm | no less than 0.39mm | |||
| 0.5mm | 0.4mm-0.42mm | 0.43mm-0.47mm | 0.47mm-0.49mm | no less than 0.49mm | |||
| 0.6mm | 0.5mm-0.52mm | 0.53mm-0.56mm | 0.57mm-0.59mm | no less than 0.59mm | |||
| 0.7mm | 0.6mm-0.62mm | 0.63mm-0.67mm | 0.67mm-0.69mm | no less than 0.69mm | |||
| 0.8mm | 0.7mm-0.72mm | 0.73mm-0.77mm | 0.74mm-0.79mm | no less than 0.79mm | |||
| 0.9mm | 0.8mm-0.82mm | 0.83mm-0.87mm | 0.87mm-0.89mm | no less than 0.89mm | |||
| 1.0mm | 0.89mm-0.9mm | 0.91mm-0.94mm | 0.94mm-0.99mm | no less than 0.99mm | |||
| 1.2mm | 1.02mm-1.08mm | 1.09mm-1.15mm | 1.16mm-1.18mm | no less than 1.18mm | |||
| 1.5mm | 1.32mm-1.38mm | 1.39mm-1.45mm | 1.46mm-1.48mm | no less than 1.48mm | |||
| 2.0mm | 1.72mm-1.79mm | 1.8mm-1.86mm | 1.87mm-1.9mm | no less than 1.9mm | |||
| 2.5mm | 2.23mm-2.36mm | 2.32mm-2.42mm | 2.42mm-2.47mm | no less than 2.48mm | |||
| 3.0mm | 2.7mm-2.77mm | 2.78mm-2.85mm | 2.85mm-2.9mm | no less than 2.9mm | |||
Factory and Machinery Equipment :
We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,
1. CNC Flame Cutting Machine
2. CNC Plasma Cutting Machine
3. CNC Laser Cutting Machine
4. Bending Machine
5. Shearing Machine
6. Punch Machine
7. Driving Machine
Different kinds of finish sevices
Process machine